| 翻訳と辞書 |
| Precision Tech Fergy ： ウィキペディア英語版 |
Precision Tech Fergy
The Precision Tech Fergy F-II B is a two-seats-in-tandem, conventional landing gear, strut-braced, high-wing, pusher configuration ultralight aircraft that was manufactured by Ferguson Aircraft and later Precision Tech Aircraft in kit form for amateur construction. The aircraft is out of production and no longer available.〔〔Cliche, Andre: ''Ultralight Aircraft Shopper's Guide'' 8th Edition, page B-78. Cybair Limited Publishing, 2001. ISBN 0-9680628-1-4〕〔Bertrand, Noel; Rene Coulon; et al: ''World Directory of Leisure Aviation 2003-04'', pages 22-23. Pagefast Ltd, Lancaster OK, 2003. ISSN 1368-485X〕〔Downey, Julia: ''2001 Kit Aircraft Directory'', Kitplanes, Volume 17, Number 12, December 2000, page 49. Kitplanes Acquisition Company. ISSN 0891-1851〕〔Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', page 158. BAI Communications, 15 July 1998. ISBN 0-9636409-4-1〕
==Design and development==
The Fergy was developed from the Kolb Mark III and introduced to the market in 1991. Reviewer Andre Cliche describes it as a "clone", whilst Noel Bertrand et al. claim it was "inspired by the Kolb Twinstar". The aircraft differs from the Kolb design in that it has a revised cockpit pod, with centerline-hinged doors and a square-tipped rudder. The horizontal stabilizer was also raised a few inches to give better ground clearance.〔〔〔〔
The aircraft is constructed from aluminium tubing, covered with aircraft fabric. The wings fold for storage or trailering. The standard engine supplied with the kit was the Rotax 503, with the liquid-cooled Rotax 582 optional, although the Fergie can accept engines that range in output from .〔〔〔〔
The average construction time from the kit was reported by the manufacturer as 350 hours and 40 had been completed by 2001.〔
抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』
■ウィキペディアで「Precision Tech Fergy」の詳細全文を読む
スポンサード リンク
| 翻訳と辞書 : 翻訳のためのインターネットリソース |
Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.
|
|